Concrete & Masonry

Concrete Slab Calculator

Estimate concrete needed for a slab with waste.

Estimate concrete for a slabQuickly estimate slab volume before ordering concrete. Measure the actual slab length, width and thickness.
⚡ Instant result✓ Free to use↔ Unit friendly

Calculator

● LIVE
Before you calculateMeasure the finished project dimensions. Use manufacturer coverage/yield values where a product-specific value is requested. Results are planning estimates, so verify quantities before purchasing.

How to use this calculator

Enter the requested project measurements using consistent units, then select Calculate. The result is an estimate intended to help with early material planning and budgeting.

Formula

Cubic yards = L × W × (depth ÷ 12) ÷ 27 × waste factor

Example and planning notes

Measure the actual project area carefully and use the product manufacturer's stated dimensions or coverage whenever possible. For projects with cuts, breakage, pattern matching or irregular geometry, include a suitable waste allowance.

Important: Results are estimates. Verify structural, electrical, plumbing, roofing and code-sensitive work with qualified professionals and local requirements.

Frequently asked questions

How accurate is this concrete slab calculator?

It is a planning estimate based on the values you enter. Product specifications, installation methods, site conditions and local requirements can change the amount you need.

Should I include waste?

Where a waste field is provided, use an allowance appropriate to the material and project. Complex layouts and cuts usually require more allowance.

Can I use this result to order materials?

Use it as a starting point, then verify package coverage, dimensions and supplier recommendations before ordering.

Related concrete & masonry tools

Worked example and practical checks

A 12 ft × 12 ft slab that is 4 in thick requires 48 cubic ft, approximately 1.78 cubic yd, before allowance. Thickened edges or footings must be estimated separately.

How to use the result responsibly

Use consistent units and check your measurements at the site. Round purchase quantities up to full packs where necessary. This calculator is a planning aid, not a substitute for supplier specifications, site inspection, or a qualified professional where safety and building codes apply.

Slab volume worked example

For a 12 ft × 10 ft slab that is 4 inches thick, thickness is 4 ÷ 12 = 0.333 ft. The volume is approximately 40 cubic feet, or 1.48 cubic yards before any waste allowance.

Example and checks

Check whether the slab has thickened edges, trenches or separate footings; these should be measured separately. Concrete mix yield and delivery minimums can affect the final order.

Check slab thickness across the site

Measure depth at multiple points on uneven subgrade. Thickened edges, beam pockets and footings need separate volumes; confirm delivery minimums and practical waste allowance.