Concrete & Masonry
Concrete Calculator
Estimate concrete volume for a rectangular pour.
Calculator
● LIVEHow to use this calculator
Enter the pour length and width in feet and the concrete depth in inches, then select Calculate. The calculator converts the dimensions into volume and reports cubic yards, cubic feet and cubic meters. Measure the actual pour dimensions rather than relying only on nominal plan sizes.
Formula
Example and planning notes
A rectangular slab’s volume is based on length × width × depth, with the depth converted to the same unit before multiplication. Concrete is commonly ordered by cubic yard, so the calculator converts the finished volume for planning. Excavation variation, uneven subgrade, spillage and supplier practices can affect the amount ultimately ordered.
Frequently asked questions
How do I calculate concrete for a slab?
Multiply slab length by width by depth after converting all dimensions to compatible units. The result can then be converted to cubic yards for ordering estimates.
Why is concrete measured in cubic yards?
Concrete is a volume material. In the United States, ready-mix concrete is commonly planned and ordered in cubic yards rather than square feet.
Should I order exactly the calculated amount?
The calculated volume is a planning baseline. Actual jobs can require extra material because of subgrade variation, forms, spillage or measurement differences; confirm the order quantity with your supplier or contractor.
What if I am using bags instead of ready-mix?
Use the Concrete Bag Calculator to estimate bag quantities from the required concrete volume. For a slab-specific workflow, see the Concrete Slab Calculator.
Related concrete & masonry tools
Concrete Slab Calculator
Estimate concrete needed for a slab with waste.
Open calculator →Concrete & MasonryConcrete Bag Calculator
Estimate the number of premix concrete bags required.
Open calculator →Concrete & MasonryConcrete Footing Calculator
Estimate concrete for continuous rectangular footings.
Open calculator →Concrete & MasonryBrick Calculator
Estimate bricks for a wall from wall and brick face dimensions.
Open calculator →Concrete & MasonryConcrete Block Calculator
Estimate standard concrete blocks for a wall.
Open calculator →Worked example and practical checks
For a slab 10 ft × 10 ft × 4 in, convert 4 in to 0.333 ft; volume is about 33.3 cubic ft or 1.23 cubic yd. Check the slab thickness and subgrade before ordering.
How to use the result responsibly
Use consistent units and check your measurements at the site. Round purchase quantities up to full packs where necessary. This calculator is a planning aid, not a substitute for supplier specifications, site inspection, or a qualified professional where safety and building codes apply.