Concrete & Masonry

Concrete Footing Calculator

Estimate concrete for continuous rectangular footings.

Use the Concrete Footing CalculatorEstimate concrete for continuous rectangular footings.
⚡ Instant result✓ Free to use↔ Unit friendly

Calculator

● LIVE
Before you calculateMeasure the finished project dimensions. Use manufacturer coverage/yield values where a product-specific value is requested. Results are planning estimates, so verify quantities before purchasing.

How to use this calculator

Enter the requested project measurements using consistent units, then select Calculate. The result is an estimate intended to help with early material planning and budgeting.

Formula

Cubic yards = length × width(ft) × depth(ft) ÷ 27 × waste factor

Example and planning notes

Measure the actual project area carefully and use the product manufacturer's stated dimensions or coverage whenever possible. For projects with cuts, breakage, pattern matching or irregular geometry, include a suitable waste allowance.

Important: Results are estimates. Verify structural, electrical, plumbing, roofing and code-sensitive work with qualified professionals and local requirements.

Frequently asked questions

How accurate is this concrete footing calculator?

It is a planning estimate based on the values you enter. Product specifications, installation methods, site conditions and local requirements can change the amount you need.

Should I include waste?

Where a waste field is provided, use an allowance appropriate to the material and project. Complex layouts and cuts usually require more allowance.

Can I use this result to order materials?

Use it as a starting point, then verify package coverage, dimensions and supplier recommendations before ordering.

Related concrete & masonry tools

Worked example and practical checks

A continuous footing 30 ft long × 2 ft wide × 1 ft deep uses 60 cubic ft, or about 2.22 cubic yd of concrete. Footing size must follow local engineering and code requirements.

How to use the result responsibly

Use consistent units and check your measurements at the site. Round purchase quantities up to full packs where necessary. This calculator is a planning aid, not a substitute for supplier specifications, site inspection, or a qualified professional where safety and building codes apply.

Separate footing dimensions

Footing width and depth may differ by load and local conditions. Calculate each footing run separately and seek qualified guidance for structural dimensions and reinforcement.