Concrete & Masonry

Brick Calculator

Estimate bricks for a wall from wall and brick face dimensions.

Use the Brick CalculatorEstimate bricks for a wall from wall and brick face dimensions.
⚡ Instant result✓ Free to use↔ Unit friendly

Calculator

● LIVE
Before you calculateMeasure the finished project dimensions. Use manufacturer coverage/yield values where a product-specific value is requested. Results are planning estimates, so verify quantities before purchasing.

How to use this calculator

Enter the total wall area in square feet, then enter the visible face length and height of one brick in inches. Add a waste percentage for cuts and breakage, then select Calculate. The calculator converts the brick face to square feet and estimates the brick count including waste.

Formula

Bricks = wall area ÷ brick face area × waste factor

Example and planning notes

For a wall, use the net area you plan to cover. If the wall has large doors or windows, subtract those openings before calculating. Brick dimensions can vary, and mortar joints affect real-world coverage, so compare the estimate with the brick supplier’s stated pieces-per-square-foot or project guidance before ordering.

For related planning, use the Concrete Block Calculator for block walls or the Concrete Calculator when the project also needs concrete.

Important: Results are estimates. Verify structural, electrical, plumbing, roofing and code-sensitive work with qualified professionals and local requirements.

Frequently asked questions

What measurements do I need for the brick calculator?

You need the wall area in square feet, the visible brick face length and height in inches, and a waste percentage.

Should I subtract doors and windows from wall area?

For large openings, subtract their area from the gross wall area to get a better estimate of the surface that will actually receive brick.

Does the calculator include mortar joints?

The calculation uses the brick face dimensions you enter. Actual installed coverage can change with mortar-joint width, so verify the estimate against supplier coverage information.

How much waste should I allow for bricks?

Waste depends on cuts, breakage, layout and site conditions. Use the waste field for your project and confirm the final order quantity with your supplier.

Related concrete & masonry tools

Worked example and practical checks

For a wall 20 ft long and 8 ft high, start with 160 sq ft and subtract windows and doors. Divide by the installed face area of a brick including mortar joints; add a breakage and cut allowance.

How to use the result responsibly

Use consistent units and check your measurements at the site. Round purchase quantities up to full packs where necessary. This calculator is a planning aid, not a substitute for supplier specifications, site inspection, or a qualified professional where safety and building codes apply.

Allow for mortar joints

Brick count depends on the visible brick face plus joint thickness. Subtract major openings and allow extra units for cuts, corners and breakage; verify local brick dimensions.