Category
Concrete & Masonry Calculators
Useful estimates for concrete & masonry projects.
Concrete Calculator
Estimate concrete volume for a rectangular pour.
Open calculator โConcrete & MasonryConcrete Slab Calculator
Estimate concrete needed for a slab with waste.
Open calculator โConcrete & MasonryConcrete Bag Calculator
Estimate the number of premix concrete bags required.
Open calculator โConcrete & MasonryConcrete Footing Calculator
Estimate concrete for continuous rectangular footings.
Open calculator โConcrete & MasonryBrick Calculator
Estimate bricks for a wall from wall and brick face dimensions.
Open calculator โConcrete & MasonryConcrete Block Calculator
Estimate standard concrete blocks for a wall.
Open calculator โConcrete & MasonryMortar Calculator
Estimate mortar volume as a percentage of masonry volume.
Open calculator โConcrete & MasonryRebar Calculator
Estimate rebar length for a two-way slab grid.
Open calculator โConcrete and masonry estimating basics
Concrete quantity depends on length, width and thickness. Convert all dimensions to the same unit before multiplying to find volume. For a slab measured in feet, divide thickness in inches by 12 to obtain thickness in feet, then divide cubic feet by 27 for cubic yards.
Material and coverage considerations
Bagged concrete yields vary by bag weight and mix, so use the yield printed on the actual product packaging. Footings, steps and uneven ground may need separate calculations. Brick and block counts depend on unit dimensions, mortar joints and openings.
Before you order
Account for spillage and uneven excavation where appropriate, but do not treat a quantity estimate as structural design. Foundation thickness, reinforcement, curing and load-bearing requirements should be confirmed with local codes and qualified professionals.
Before estimating a pour
Draw each pour as a separate shape, record thickness and convert units before calculating volume. Order quantities depend on yield, delivery rules and site access; consult a qualified professional for structural design.
Common estimating mistake to avoid
Volume estimates are sensitive to depth: increasing slab thickness from 4 inches to 6 inches increases concrete volume by 50% for the same footprint. Masonry estimates also depend on joint thickness and the actual unit size.