Flooring & Tile
Tile Calculator
Estimate individual tiles from project area and tile dimensions.
Calculator
● LIVEHow to use this calculator
Enter the project area and the tile dimensions requested by the calculator, then select Calculate. The tool compares the total surface area with the area covered by one tile to estimate the number of tiles required. Base your measurements on the actual tiled surface and keep tile dimensions consistent.
Formula
Example and planning notes
Tile quantity starts with project area divided by the area of one tile. The practical purchase quantity is often higher because edge cuts, breakage, pattern layouts and future repairs can require spare pieces. Complex patterns or diagonal layouts generally create more offcuts than a simple straight layout.
Frequently asked questions
How do I calculate how many tiles I need?
Divide the total project area by the area of one tile, using compatible units. Round up to whole tiles because partial tiles cannot be purchased as fractions.
Should I add extra tile for waste?
A waste allowance is commonly used for cuts, breakage and layout. The appropriate amount depends on the room shape, tile size, pattern and installer plan, so verify it for your specific project.
Do grout joints change the estimate?
Grout joints affect the installed layout and spacing. For purchasing, verify the tile manufacturer’s nominal and actual dimensions and plan the layout rather than relying only on a raw area division.
Which calculators can help with the rest of the floor?
Use the Square Footage Calculator to establish area, the Grout Calculator for grout planning, or the Flooring Calculator for other flooring materials.
Related flooring & tile tools
Flooring Calculator
Estimate flooring purchase area including waste.
Open calculator →Flooring & TileCarpet Calculator
Estimate carpet area in square yards.
Open calculator →Flooring & TileGrout Calculator
Estimate grout volume from tile layout dimensions.
Open calculator →Flooring & TileBaseboard Calculator
Estimate baseboard length from room perimeter and openings.
Open calculator →Worked example and practical checks
A 10 ft × 12 ft floor covers 120 sq ft. With 10% allowance, target about 132 sq ft of tile; tile shape, pattern and packaging affect the final box count.
How to use the result responsibly
Use consistent units and check your measurements at the site. Round purchase quantities up to full packs where necessary. This calculator is a planning aid, not a substitute for supplier specifications, site inspection, or a qualified professional where safety and building codes apply.