Measurement

Square Footage Calculator

Calculate rectangular area and perimeter.

Measure rectangular floor or wall areaEnter length and width to calculate square footage and perimeter.
⚡ Instant result✓ Free to use↔ Unit friendly

Calculator

● LIVE
Before you calculateMeasure the finished project dimensions. Use manufacturer coverage/yield values where a product-specific value is requested. Results are planning estimates, so verify quantities before purchasing.

How to use this calculator

Enter the room or rectangular surface length and width in feet, then select Calculate. The result shows square footage (length × width) and perimeter (2 × [length + width]). For L-shaped rooms, split the floor into rectangles, calculate each area, then add the results. Use the total area for a flooring or tile estimate; perimeter is useful when planning trim or baseboards.

Formula

Area = length × width

Example and planning notes

For a 12 ft by 15 ft room, the area is 180 sq ft and the perimeter is 54 ft. Measure each section at its finished dimensions. For flooring, tile, paint or other materials, use the calculated area as the starting point and then apply the product’s coverage and an appropriate waste allowance.

Important: Results are estimates. Verify structural, electrical, plumbing, roofing and code-sensitive work with qualified professionals and local requirements.

Frequently asked questions

How do I calculate square footage?

Multiply length by width when both measurements are in feet. For example, 12 ft × 15 ft = 180 square feet.

How do I measure an irregular room?

Break the room into simple rectangles, calculate the square footage of each section, and add the results. Treat alcoves or other separate sections individually.

Is square footage the same as perimeter?

No. Square footage measures area, while perimeter is the total distance around the outside edges of the rectangle.

What can I do with the square footage result?

Use it as an input for material planning. You can continue with the Flooring Calculator, Paint Calculator or Tile Calculator depending on the project.

Related measurement tools

Worked example and practical checks

A 14 ft × 11 ft rectangle has 154 sq ft of area and 50 ft of perimeter. Measure irregular spaces as separate rectangles and sum their areas.

How to use the result responsibly

Use consistent units and check your measurements at the site. Round purchase quantities up to full packs where necessary. This calculator is a planning aid, not a substitute for supplier specifications, site inspection, or a qualified professional where safety and building codes apply.

Split irregular rooms into simple shapes

Measure the inside dimensions of each rectangle and add their areas. Subtract large excluded spaces if appropriate, and do not mix inches with feet.