Measurement
Area Calculator
Find the area of rectangles, circles and triangles from dimensions measured in feet. Get square-foot results and check the worked examples below.
Calculator
● LIVEHow to use this calculator
Choose a shape, then enter its dimensions. For circles, only the radius is needed; the second measurement is ignored. Select feet, inches, meters or centimeters beside each input. The calculator converts those measurements to feet and returns square feet.
Formula
Example and planning notes
Measure the actual project area carefully and use the product manufacturer's stated dimensions or coverage whenever possible. For projects with cuts, breakage, pattern matching or irregular geometry, include a suitable waste allowance.
Frequently asked questions
Which measurement does the circle option need?
Enter the radius, the distance from the center to the edge. If you know the diameter, divide it by two. The second dimension is ignored.
Can I use meters or inches?
Yes. Choose the unit next to each numeric input. The calculator converts the dimensions and reports the final area in square feet; 1 m² is approximately 10.764 ft².
How do I measure an irregular room?
Divide the plan into rectangles or triangles, calculate each area and add the results. Subtract openings only when your project calls for them.
Related measurement tools
Square Footage Calculator
Calculate rectangular area and perimeter.
Open calculator →MeasurementCubic Yards Calculator
Convert project dimensions into cubic yards.
Open calculator →MeasurementFeet & Inches Calculator
Add two feet-and-inches measurements.
Open calculator →Worked example and practical checks
For a rectangular room 12 ft by 10 ft, area is 120 sq ft. For a circle with radius 5 ft, area is about 78.54 sq ft; for a triangle with base 10 ft and perpendicular height 6 ft, area is 30 sq ft. The second dimension is not used for a circle.
How to use the result responsibly
Use consistent units and check your measurements at the site. Round purchase quantities up to full packs where necessary. This calculator is a planning aid, not a substitute for supplier specifications, site inspection, or a qualified professional where safety and building codes apply.