Landscaping & Outdoor
Gravel Calculator
Estimate gravel volume for paths, beds and driveways.
Calculator
● LIVEHow to use this calculator
Enter the project length and width in feet and the planned gravel depth in inches. Add a waste percentage if needed, then select Calculate. The calculator converts depth to feet, finds the cubic volume and converts the result to cubic yards for ordering and budgeting.
Formula
Example and planning notes
Measure the area at its finished dimensions and choose a compacted or installed depth appropriate for the project. Irregular driveways or paths can be divided into smaller rectangles and calculated separately. Gravel is often sold by volume or weight, and material density varies, so use the cubic-yard result as a planning figure and confirm the supplier’s conversion when ordering by tons.
If you are comparing outdoor materials, also see the Mulch Calculator, Topsoil Calculator and Paver Calculator.
Frequently asked questions
How do I calculate cubic yards of gravel?
Multiply length by width by depth in feet to get cubic feet, then divide by 27 to convert cubic feet to cubic yards. This calculator performs that conversion and can add waste.
Why is gravel depth entered in inches?
Gravel layers are commonly planned in inches. The calculator converts the entered depth to feet before calculating volume.
Can I use this for an irregular driveway or path?
Yes. Divide the project into simple rectangular sections, calculate each section, and add the cubic-yard results together.
Does cubic yards tell me how many tons of gravel to buy?
Not by itself. Weight depends on gravel type, size, moisture and supplier density. Ask the supplier for the appropriate tons-per-cubic-yard conversion for the selected material.
Related landscaping & outdoor tools
Mulch Calculator
Estimate mulch volume from bed area and depth.
Open calculator →Landscaping & OutdoorTopsoil Calculator
Estimate topsoil volume for lawns and garden beds.
Open calculator →Landscaping & OutdoorPaver Calculator
Estimate paver quantity from area and paver size.
Open calculator →Landscaping & OutdoorFence Calculator
Estimate fence posts and panels from total run length.
Open calculator →Landscaping & OutdoorDecking Calculator
Estimate linear feet of deck boards from deck area.
Open calculator →Worked example and practical checks
A 10 ft × 12 ft area at 3 in deep requires 30 cubic ft, about 1.11 cubic yd. Compaction and material density vary, so confirm how your supplier sells gravel.
How to use the result responsibly
Use consistent units and check your measurements at the site. Round purchase quantities up to full packs where necessary. This calculator is a planning aid, not a substitute for supplier specifications, site inspection, or a qualified professional where safety and building codes apply.