Landscaping & Outdoor
Fence Calculator
Estimate fence materials from run length and post spacing, with planning guidance for posts, sections, gates, corners and waste.
Calculator
● LIVEHow to use this calculator
Measure the total fence run and enter the spacing or section dimensions requested by the calculator. Plan each straight run separately when the layout changes direction. Account for end posts, corner posts and gate openings before finalizing the material order.
Formula
Example and planning notes
A fence with several corners and gates can require more posts and hardware than a straight run of the same length. Confirm panel width or picket spacing, post-center spacing and gate dimensions before buying. Sloped ground and partial end sections may also change material quantities.
Frequently asked questions
How do I estimate fence posts?
Start with the length of each fence run and the intended post spacing. Posts are also needed at ends, corners and gate locations, so the final layout should be checked rather than relying only on a single division.
Should gate openings be included in fence length?
Include gates in the overall layout, but account for their specific width and dedicated posts so you do not also count the opening as a normal fence section.
What happens if the last fence section is shorter?
Most layouts need a partial final section unless the run divides evenly by the chosen spacing. Plan for cutting or adjusting that section while keeping post spacing within the system’s requirements.
Does sloped ground change the material estimate?
It can. Stepped or racked fence layouts may change post positions, panel use and cutting requirements. Check the fence system’s installation guidance for slopes.
Related landscaping & outdoor tools
Gravel Calculator
Estimate gravel volume for paths, beds and driveways.
Open calculator →Landscaping & OutdoorMulch Calculator
Estimate mulch volume from bed area and depth.
Open calculator →Landscaping & OutdoorTopsoil Calculator
Estimate topsoil volume for lawns and garden beds.
Open calculator →Landscaping & OutdoorPaver Calculator
Estimate paver quantity from area and paver size.
Open calculator →Landscaping & OutdoorDecking Calculator
Estimate linear feet of deck boards from deck area.
Open calculator →Worked example and practical checks
For a straight 100 ft fence with posts spaced no more than 8 ft apart, plan for at least 13 intervals and 14 posts if both ends need posts. Gates and corners change the layout.
How to use the result responsibly
Use consistent units and check your measurements at the site. Round purchase quantities up to full packs where necessary. This calculator is a planning aid, not a substitute for supplier specifications, site inspection, or a qualified professional where safety and building codes apply.