Landscaping & Outdoor

Gravel Calculator

Estimate gravel volume for paths, beds and driveways.

Estimate gravel volumeConvert project dimensions into cubic yards so you can plan a gravel order.
⚡ Instant result✓ Free to use↔ Unit friendly

Calculator

● LIVE
Before you calculateMeasure the finished project dimensions. Use manufacturer coverage/yield values where a product-specific value is requested. Results are planning estimates, so verify quantities before purchasing.

How to use this calculator

Enter the project length and width in feet and the planned gravel depth in inches. Add a waste percentage if needed, then select Calculate. The calculator converts depth to feet, finds the cubic volume and converts the result to cubic yards for ordering and budgeting.

Formula

Cubic yards = L × W × depth(ft) ÷ 27 × waste factor

Example and planning notes

Measure the area at its finished dimensions and choose a compacted or installed depth appropriate for the project. Irregular driveways or paths can be divided into smaller rectangles and calculated separately. Gravel is often sold by volume or weight, and material density varies, so use the cubic-yard result as a planning figure and confirm the supplier’s conversion when ordering by tons.

If you are comparing outdoor materials, also see the Mulch Calculator, Topsoil Calculator and Paver Calculator.

Important: Results are estimates. Verify structural, electrical, plumbing, roofing and code-sensitive work with qualified professionals and local requirements.

Frequently asked questions

How do I calculate cubic yards of gravel?

Multiply length by width by depth in feet to get cubic feet, then divide by 27 to convert cubic feet to cubic yards. This calculator performs that conversion and can add waste.

Why is gravel depth entered in inches?

Gravel layers are commonly planned in inches. The calculator converts the entered depth to feet before calculating volume.

Can I use this for an irregular driveway or path?

Yes. Divide the project into simple rectangular sections, calculate each section, and add the cubic-yard results together.

Does cubic yards tell me how many tons of gravel to buy?

Not by itself. Weight depends on gravel type, size, moisture and supplier density. Ask the supplier for the appropriate tons-per-cubic-yard conversion for the selected material.

Related landscaping & outdoor tools

Worked example and practical checks

A 10 ft × 12 ft area at 3 in deep requires 30 cubic ft, about 1.11 cubic yd. Compaction and material density vary, so confirm how your supplier sells gravel.

How to use the result responsibly

Use consistent units and check your measurements at the site. Round purchase quantities up to full packs where necessary. This calculator is a planning aid, not a substitute for supplier specifications, site inspection, or a qualified professional where safety and building codes apply.

Compaction changes delivered quantity

Measure the compacted depth required for the project. Gravel sold by weight needs a supplier-specific bulk density; wet material and grading affect the conversion.