Measurement

Area Calculator

Find the area of rectangles, circles and triangles from dimensions measured in feet. Get square-foot results and check the worked examples below.

Find area by shapeChoose rectangle, circle or triangle, enter the requested dimensions, and get the area instantly.
⚡ Instant result✓ Free to use↔ Select length units

Calculator

● LIVE
Before you calculateFor a rectangle, enter length and width. For a triangle, enter base and perpendicular height. For a circle, enter radius only. Select units beside the measurement inputs; the result is shown in square feet.

How to use this calculator

Choose a shape, then enter its dimensions. For circles, only the radius is needed; the second measurement is ignored. Select feet, inches, meters or centimeters beside each input. The calculator converts those measurements to feet and returns square feet.

Formula

Rectangle: length × width. Triangle: base × perpendicular height ÷ 2. Circle: π × radius². All dimensions are converted to feet before calculating area in ft².

Example and planning notes

Measure the actual project area carefully and use the product manufacturer's stated dimensions or coverage whenever possible. For projects with cuts, breakage, pattern matching or irregular geometry, include a suitable waste allowance.

Important: Results are estimates. Verify structural, electrical, plumbing, roofing and code-sensitive work with qualified professionals and local requirements.

Frequently asked questions

Which measurement does the circle option need?

Enter the radius, the distance from the center to the edge. If you know the diameter, divide it by two. The second dimension is ignored.

Can I use meters or inches?

Yes. Choose the unit next to each numeric input. The calculator converts the dimensions and reports the final area in square feet; 1 m² is approximately 10.764 ft².

How do I measure an irregular room?

Divide the plan into rectangles or triangles, calculate each area and add the results. Subtract openings only when your project calls for them.

Related measurement tools

Worked example and practical checks

For a rectangular room 12 ft by 10 ft, area is 120 sq ft. For a circle with radius 5 ft, area is about 78.54 sq ft; for a triangle with base 10 ft and perpendicular height 6 ft, area is 30 sq ft. The second dimension is not used for a circle.

How to use the result responsibly

Use consistent units and check your measurements at the site. Round purchase quantities up to full packs where necessary. This calculator is a planning aid, not a substitute for supplier specifications, site inspection, or a qualified professional where safety and building codes apply.

Choose the correct shape

A rectangle uses length × width. A triangle uses base × height ÷ 2, while a circle uses π × radius². Be sure the radius is half the diameter.

Example and checks

For example, a 12 ft by 9 ft rectangle covers 108 sq ft. If you select meters for an input, the calculator converts it to feet before computing the square-foot result.

Choose the right measurement

For circles, measure the radius from the centre to the edge rather than the diameter. For triangles, use the perpendicular height, not a sloping side. Divide L-shaped rooms into rectangles and add their areas.