Walls & Paint
Wallpaper Calculator
Estimate wallpaper rolls from wall area, roll coverage and waste allowance, with practical guidance for pattern matching and ordering.
Calculator
● LIVEHow to use this calculator
Enter the total wall area, the usable coverage shown for one wallpaper roll, and a waste percentage. Use the manufacturer’s stated coverage rather than only the physical roll size, especially for patterned wallpaper. Select Calculate to estimate the number of rolls required.
Formula
Example and planning notes
For 420 ft² of wall area with 56 ft² of usable coverage per roll and 15% waste, plan from the adjusted area rather than the bare wall area. Pattern repeats, trimming at ceilings and baseboards, damaged strips and matching around doors or windows can increase real usage. Round your purchase up to whole rolls and, when possible, buy the same batch or dye lot.
Frequently asked questions
How do I calculate wallpaper rolls?
Divide the wall area by the usable coverage per roll, then apply the waste allowance. Round the final quantity up because wallpaper is purchased in whole rolls.
How much extra wallpaper should I allow for pattern matching?
The right allowance depends on the pattern repeat and room layout. Large repeats and many corners or openings can create more offcuts, so check the manufacturer’s pattern information before ordering.
Should I subtract windows and doors from the wall area?
For a planning estimate, small openings are often left in the measured area because they can offset trimming and waste. For large openings, measure more precisely and compare the result with your installer or supplier.
Why should wallpaper rolls be from the same batch?
Color can vary slightly between production batches. Buying enough rolls together can reduce visible shade differences across the finished room.
Related walls & paint tools
Paint Calculator
Estimate paint gallons from area, coats and product coverage.
Open calculator →Walls & PaintDrywall Calculator
Estimate drywall sheets from total wall or ceiling area.
Open calculator →Walls & PaintWall Stud Calculator
Estimate wall studs using wall length and on-center spacing.
Open calculator →Walls & PaintInsulation Calculator
Estimate insulation packages from project area and package coverage.
Open calculator →Worked example and practical checks
Measure wall width and height, subtract openings only when the pattern layout permits it, then account for roll width and pattern repeat. A large repeat can create substantial offcuts.
How to use the result responsibly
Use consistent units and check your measurements at the site. Round purchase quantities up to full packs where necessary. This calculator is a planning aid, not a substitute for supplier specifications, site inspection, or a qualified professional where safety and building codes apply.