Roofing

Roofing Shingle Calculator

Estimate roofing squares and shingle bundles.

Use the Roofing Shingle CalculatorEstimate roofing squares and shingle bundles.
⚡ Instant result✓ Free to use↔ Unit friendly

Calculator

● LIVE
Before you calculateMeasure the finished project dimensions. Use manufacturer coverage/yield values where a product-specific value is requested. Results are planning estimates, so verify quantities before purchasing.

How to use this calculator

Enter the total sloped roof area in square feet, add a waste percentage, and enter the number of shingle bundles required per roofing square for the product you plan to use. Select Calculate to estimate roofing squares and the corresponding bundle quantity.

Formula

Roofing squares = roof area × waste factor ÷ 100

Example and planning notes

Use actual sloped roof area rather than only the building footprint. Roof complexity, valleys, hips, ridges and starter courses can affect material needs, so include an appropriate waste allowance and follow the shingle manufacturer’s installation requirements. Confirm bundles-per-square from the specific product because package coverage can vary.

If you do not yet know the sloped surface area, start with the Roof Area Calculator. For drainage planning, see the Gutter Length Calculator.

Important: Results are estimates. Verify structural, electrical, plumbing, roofing and code-sensitive work with qualified professionals and local requirements.

Frequently asked questions

What is a roofing square?

A roofing square is a unit equal to 100 square feet of roof area. The calculator converts the waste-adjusted roof area into roofing squares.

How do I find the roof area to enter?

Use the actual sloped roof surface area. If you only have footprint dimensions and roof pitch, first use the Roof Area Calculator to estimate the sloped area.

How many shingle bundles are in a roofing square?

It depends on the shingle product. Enter the bundles-per-square value specified for the shingles you plan to use rather than assuming one fixed number.

Why should I include roofing waste?

Cuts at valleys, hips, ridges, edges and complex roof sections can increase material use. Waste needs vary by roof geometry and installation requirements.

Related roofing tools

Worked example and practical checks

A 2,000 sq ft roof equals 20 roofing squares before waste. If a specific shingle uses 3 bundles per square, that is 60 bundles before cuts, ridge and starter materials.

How to use the result responsibly

Use consistent units and check your measurements at the site. Round purchase quantities up to full packs where necessary. This calculator is a planning aid, not a substitute for supplier specifications, site inspection, or a qualified professional where safety and building codes apply.

From square feet to roofing squares

One roofing square equals 100 square feet of roof area. Divide roof area by 100, then use the specific shingle packaging information to estimate bundles.

Example and checks

For a 2,000 sq ft roof, the starting quantity is 20 roofing squares before waste, starter material and ridge products. Bundle counts depend on the chosen shingles.

Confirm bundle coverage

One roofing square equals 100 square feet of roof area. Bundles per square vary by shingle product; include starter, ridge and hip materials separately.