Roofing

Roof Area Calculator

Calculate sloped roof area in square feet using building length, width and roof pitch (rise per 12 inches). Includes a worked example and material planning tips.

Estimate sloped roof areaConvert building footprint and roof pitch into an approximate sloped roof area.
⚡ Instant result✓ Free to use↔ Unit friendly

Calculator

● LIVE
Before you calculateMeasure the finished project dimensions. Use manufacturer coverage/yield values where a product-specific value is requested. Results are planning estimates, so verify quantities before purchasing.

How to use this calculator

Enter the building length and width in feet, then enter the roof pitch as inches of rise per 12 inches of horizontal run (for example, enter 6 for a 6:12 pitch). Select Calculate to estimate sloped roof area. The formula applies a pitch multiplier to the rectangular footprint; it does not automatically account for roof overhangs, dormers or complicated roof geometry.

Formula

Sloped area = footprint × √(1 + (rise/12)²)

Example and planning notes

For a 40 ft × 30 ft rectangular footprint, the plan area is 1,200 sq ft. With a 6:12 pitch, the multiplier is √(1 + (6/12)²) ≈ 1.118, giving an estimated sloped roof area of about 1,342 sq ft. This is a simplified single-pitch estimate, not a roof measurement for complex designs.

Measure overhangs separately and account for valleys, hips, dormers and roof sections with different pitches. When estimating shingles, use the Roofing Shingle Calculator and check product coverage and waste allowances. Roof work requires appropriate safety precautions and professional verification.

Frequently asked questions

What does a 6:12 roof pitch mean?

A 6:12 pitch rises 6 inches for every 12 inches of horizontal run. Enter 6 in the Rise per 12 in field.

How do I calculate roof area from length, width and pitch?

Multiply building length by width to get the footprint, then multiply by √(1 + (rise/12)²) to estimate the sloped area.

Does the result include roof overhangs and dormers?

No. The simplified calculation uses the entered rectangular footprint and one pitch. Measure overhangs and complex roof sections separately.

Can I use this result to estimate shingles?

Yes, as a starting area estimate. Use the Roofing Shingle Calculator for bundles and roofing squares, and allow for cuts and waste.

Related roofing tools

Worked example and practical checks

For a 20 ft × 30 ft horizontal footprint at 6:12 pitch, the slope factor is about 1.118, giving about 671 sq ft for a simple roof footprint before overhangs and details.

How to use the result responsibly

Use consistent units and check your measurements at the site. Round purchase quantities up to full packs where necessary. This calculator is a planning aid, not a substitute for supplier specifications, site inspection, or a qualified professional where safety and building codes apply.

Footprint is not roof surface

A pitched roof generally has more surface area than its horizontal footprint. The conversion depends on roof pitch and the geometry of the roof planes.

Example and checks

For irregular roofs, measure or estimate each plane separately, then sum them. Dormers, overhangs and intersections can make a simple footprint estimate too low.

Pitch increases surface area

A roof footprint is a horizontal projection, not the sloped surface. Measure roof planes separately and include overhangs; dormers and valleys add complexity.